-
Working Principle of the water chiller
May 17 , 2021
Chillers are divided into air-cooled chillers and water-cooled chillers. The working principle diagram of air-cooled chillers is as follows Working Principle of air-cooled chiller The air-cooled chiller uses a shell and tube evaporator (or tank with coil) to exchange heat between water and refrigerant. The refrigerant system absorbs the heat load from the water and cools the water to produce cold ...
Read More
-
Glycol chiller VS water chiller-why chiller use glycol?
Jul 01 , 2021
The global demand for industrial process cooling system remains steadily rising. Reliability and minimal downtime are the keys to achieving consistent and profitable industrial and commercial processes. This article will consider the best way to achieve the optimal temperature required for production processes in the metal finishing, medical, brewing, and agricultural industries. Glycol chi...
Read More
-
Common failures in chiller maintenance
Jul 02 , 2021
Common failures in chiller maintenance During the maintenance of the chiller, in some environments with many dust layers, after the chiller has been used for a period of time, we will find that the chiller is noisy, and there are many dust layers on the accessories. This is a common phenomenon in the use of the chiller. At this time, the chiller is We need to serve it. First of all, the chill...
Read More
-
Important parts of low-temperature chiller assembly matters and refrigeration methods
Jul 04 , 2021
Commonly used auxiliary accessories for low temperature chillers, including water flow switch, pressure controller, pressure difference controller, temperature controller and solenoid valve, as well as a brief introduction of three cooling methods, liquid vaporization refrigeration, gas expansion refrigeration and thermoelectric refrigeration. Common auxiliary accessories for low-temperature chill...
Read More
-
Requirements for adding refrigerant to industrial chiller system
Jul 05 , 2021
After the industrial chiller system has passed the vacuum test, the vacuum state in the system can be used to charge the refrigerant. 1. Refrigerant charging For newly installed systems, refrigerant can be added to the high-pressure end, and the operation method is as follows: 1) Turn on the cooling water system for the condenser, and keep the valve in the system as it was during the vacuum test 2...
Read More
-
How to size a chiller - chiller cooling capacity caculation
Jul 06 , 2021
The calculation method of chiller cooling capacity and the calculation summary of chiller selection (1) How to choose the most suitable industrial chiller and screw chiller? In fact, there is a simple selection formula: Cooling capacity = chilled water flow * 4.187 * temperature difference * coefficient 1. The flow rate of chilled water refers to the flow rate of chilled water required when the ma...
Read More
-
Chiller installation and maintenance instructions
Jul 09 , 2021
Chiller installation and maintenance instructions 1. Installation instructions 1. Machine installation, it is required to lay flat and not tilt; 2. There should be a maintenance space of about one meter on both sides of the machine; 3. Connect the cooling water inlet and outlet specifications of this machine to your cooling system; 4. The ice water pipe must be replaced with a loop to allow the ic...
Read More
en
es
