-
Analysis of the advantages and disadvantages of air-cooled screw chillers and air-cooled scroll chillers
Jul 16 , 2021
Both air-cooled screw chillers and air-cooled scroll chillers are air-cooled chillers. Air-cooled chillers use air cooling, eliminating the need for cooling towers, cooling water pumps and piping systems that are essential for cooling water systems. Areas with poor water quality cause condenser fouling and water pipe blockage, and also save water resources. It is the most economical and simple mod...
Read More
-
Requirements for adding refrigerant to industrial chiller system
Jul 30 , 2021
After the industrial chiller system has passed the vacuum test, the vacuum state in the system can be used to charge the refrigerant. 1. Refrigerant charging For newly installed systems, refrigerant can be added to the high-pressure end, and the operation method is as follows: 1) Turn on the cooling water system for the condenser, and keep the valve in the system as it was during the vacuum test 2...
Read More
-
Common sense problems that should be paid attention to in the use of industrial chillers
Aug 06 , 2021
In many industries, industrial chillers are required. The industrial chiller mainly achieves the refrigeration effect through absorption cycle vapor compression or vapor compression. These liquids can flow through the heat exchanger to cool the air or equipment. When we use industrial chillers, in order to ensure safety, we should master the following precautions for safe operation of industrial c...
Read More
-
Four methods for judging the flow of chilled water in a chiller
Aug 13 , 2021
Generally speaking, when buying a chiller, you will have questions. I don't know how to judge the chilled water flow rate of the chiller? From what aspects should the chiller water flow be considered? Here is a brief talk. The detection of the return water temperature and the outlet water temperature of the chiller should be carried out in the normal state of the unit: After 30 minutes of starting...
Read More
-
How to choose a suitable pump for the chiller
Aug 20 , 2021
In a chiller cooling water system, the water pump is an indispensable component. The water pump can be installed in the chiller or outside the chiller. Generally, we install the water pump in the chiller unit for air-cooled chillers. , So that the chiller is easy to install. For a water-cooled chiller, a system requires at least two water pumps. One pump is installed in the chiller to provide chil...
Read More
-
How to clean the fins of an air-cooled chiller
Aug 24 , 2021
The air-cooled chiller is a kind of industrial chiller, and the main working principle is not much different from that of the water-cooled chiller. Air-cooled chiller is a machine that cools water at room temperature to a certain temperature through the compressor of the chiller. It is generally common in industrial manufacturing. However, air-cooled chillers are widely used, mainly for high-speed...
Read More
-
How to choose a suitable cooling tower for a water-cooled chiller
Aug 31 , 2021
In many special use environments, companies need to apply water-cooled chillers. Since water-cooled chillers need the help of cooling towers during operation, they need to follow the instructions introduced by the chiller manufacturer after purchasing water-cooled chillers. Relevant experience, complete the normal operation of water-cooled chillers, and ensure high performance of water-cooled chil...
Read More
-
What is Explosion-proof chillers ?
Sep 07 , 2021
Explosion-proof chillers require all component with electricity to be explosion-proof and will be equipped with an explosion-proof certificate. Explosion-proof chillers are based on standard chillers and are specific explosion-proof measures taken to prevent electrical equipment from igniting the surrounding explosive gas environment. It is an integral explosion-proof system. In addition to the ex...
Read More
-
What is air cooled chiller | China air cooled chiller Manufacturers & Suppliers
Sep 10 , 2021
The air-cooled chiller is one of the chiller models. It cools the water at room temperature to a certain temperature through the compressor of the chiller to strengthen cooling of the mold or machine. It is used as a stand-alone machine. The heat sink is a built-in fan. There are three main mutual Linked systems: refrigerant circulation system, water circulation system, electrical automatic contro...
Read More
en
es
