-
Important parts of low-temperature chiller assembly matters and refrigeration methods
Jul 04 , 2021
Commonly used auxiliary accessories for low temperature chillers, including water flow switch, pressure controller, pressure difference controller, temperature controller and solenoid valve, as well as a brief introduction of three cooling methods, liquid vaporization refrigeration, gas expansion refrigeration and thermoelectric refrigeration. Common auxiliary accessories for low-temperature chill...
Read More
-
Requirements for adding refrigerant to industrial chiller system
Jul 05 , 2021
After the industrial chiller system has passed the vacuum test, the vacuum state in the system can be used to charge the refrigerant. 1. Refrigerant charging For newly installed systems, refrigerant can be added to the high-pressure end, and the operation method is as follows: 1) Turn on the cooling water system for the condenser, and keep the valve in the system as it was during the vacuum test 2...
Read More
-
How to size a chiller - chiller cooling capacity caculation
Jul 06 , 2021
The calculation method of chiller cooling capacity and the calculation summary of chiller selection (1) How to choose the most suitable industrial chiller and screw chiller? In fact, there is a simple selection formula: Cooling capacity = chilled water flow * 4.187 * temperature difference * coefficient 1. The flow rate of chilled water refers to the flow rate of chilled water required when the ma...
Read More
-
Chiller installation and maintenance instructions
Jul 09 , 2021
Chiller installation and maintenance instructions 1. Installation instructions 1. Machine installation, it is required to lay flat and not tilt; 2. There should be a maintenance space of about one meter on both sides of the machine; 3. Connect the cooling water inlet and outlet specifications of this machine to your cooling system; 4. The ice water pipe must be replaced with a loop to allow the ic...
Read More
en
es
