-
Why do ultrasonic cleaning machine need to be equipped with industrial chillers?
Dec 03 , 2021
Ultrasonic cleaners also called Ultrasonic cleaning machines, are widely used in surface spray treatment industry, machinery industry, electronics industry, medical industry, semiconductor industry, watch jewelry industry, optical industry, textile printing and dyeing industry. Other industries, etc. Compared with other cleaning, ultrasonic cleaning machine has the advantages of high cleaning rate...
Read More
-
How to install the Air cooled water chiller ?
Nov 29 , 2021
Air-cooled chillers are the most widely used chillers. They are widely used in plastics, electronics, chemicals, metallurgy, video pharmacy, electroplating, leather, crafts and scientific research in industry; they are widely used in hotels in business., Hotels, supermarkets and theaters. Air-cooled chillers are also the easiest chillers to install. Since the entire system of air-cooled water chil...
Read More
-
Ways and solutions of noise produced by chillers
Nov 19 , 2021
It is inevitable that the chiller will produce sound when it is working. For example, when the fan rotates, the fan blades rub against the air, it will produce sound. Normal sound is allowed. However, even the sophisticated refrigeration equipment will appear after a long period of use. Fault. Then, the editor of Oumal Chiller will take you to understand the causes and solutions of the noise produ...
Read More
-
How to choose the right chiller in the food industry---CHILLER FOR FOOD INDUSTRY
Nov 12 , 2021
The application of chillers is very wide, including plastic industry, chemical industry, packaging industry, printing industry, food industry, etc. Today we will talk about how to choose chillers in the food industry. The water chiller used in the food industry needs to be used for rapid cooling of all kinds of food after heating, so that it can be suitable for canning and bottling requirements. I...
Read More
-
How to control the temperature of the outlet water of the low-temperature chiller?
Nov 05 , 2021
The structure of low-temperature chillers is similar to that of piston chillers. Low-temperature chillers generally refer to chillers whose outlet temperature is less than or equal to 5°C. They are mainly used for process cooling in food processing, chemical, pharmaceutical and other industries. Low-temperature chillers are usually used for low-temperature requirements on certain special productio...
Read More
-
How to deal with the high pressure failure of water cooled screw chiller
Oct 29 , 2021
Water cooled screw chiller is a water to water chiller which compressor use semi-hermetic screw type. It’s high efficient water chiller system. The cooling water system including a water cooled screw chiller, a cooling tower, a water tank, and 3 water pumps. Water cooled screw chiller is widely used in the industrial cooling system. High pressure failure of the water cooled screw chiller is the co...
Read More
-
What are the types of chiller evaporators?
Oct 15 , 2021
The evaporator is one of the main components of industrial chillers. The types of evaporators include: tank with coil evaporator, shell and tube evaporator, stainless steel plate heat exchanger, titanium tube evaporator. With so many types of evaporators, how should we choose the appropriate type of evaporator for our chiller? Water tank coil evaporator: The evaporator is a coil type structure pla...
Read More
-
Why does the chiller evaporator freeze？
Oct 12 , 2021
During the use of the chiller, sometimes freezing occurs, and the chilled water malfunctions and alarms. The evaporator is one of the four core components of the chiller, and its importance is self-evident. Once it fails, the chiller will also go on strike. Today we will talk about the more common evaporator failures, namely Icing, to analyze the cause and find a solution. Why does the chiller fre...
Read More
-
How to choose a chiller for the bottle blowing machine？
Oct 06 , 2021
What is Blow Molding Machine? Blow molding machine is a kind of equipment that makes plastic particles into hollow containers through a blow molding process. At present, the more common models include: a hollow extrusion blow molding machine that uses PP and PE for one-time molding, and uses PET, PC or PP for two moldings. The injection-stretch-blowing blow molding machine and the newly developed ...
Read More
en
es
